Old Pan and Tile Removal
We tear out the existing base, tile, and failed backer board, then haul it away. We check the framing and subfloor while it's open and show you anything that needs repair.
Leak-free bases, code-correct waterproofing, and a clean job site
Walk-In Shower Pan Installation pocatello ID Done Right
When you need walk-in shower pan installation pocatello ID homeowners can count on, we build the base right the first time. A failed pan means rot, mold, and a torn-up bathroom floor. We set a pre-sloped pan, tie in the waterproofing membrane, and test the drain before a single tile goes down. Whether it's a cracked acrylic base or a new curbless build, our crew handles shower base installation pocatello wide, from Downtown to Highland.
Careful work. Honest options.
About this service
What Walk-In Shower Pan Installation pocatello ID Involves
Walk-in shower pan installation pocatello ID is the trade of setting a pre-sloped, waterproof shower base that carries water to the drain without pooling or leaking into your subfloor. We pull the old pan, inspect the framing for rot, set a new shower pan liner or a bonded waterproofing membrane, and pitch everything toward a code-correct drain. A level, correctly sloped base is the difference between a shower that lasts 20 years and one that starts leaking in 18 months.
Most Pocatello homes we open up have one of two problems: a cracked acrylic shower base that flexes underfoot, or a tile pan where the failed caulking and grout let water behind the tile. Bannock County's dry air and cold winters also stress older pans, so we see plenty of cracked shower pans and mold and mildew in the framing. If you've been searching shower base near me pocatello, we'll tell you straight whether a repair holds or a full replacement is the smarter money.
- ✓ No More Hidden Leaks
- ✓ Slip-Resistant, Low Step-In
- ✓ Built for Pocatello Winters
- ✓ Cleaner, Faster Turnaround
What's included
What's Included in a Shower Pan Installation
Every pan job is different, but here's what our standard walk-in shower pan installation pocatello ID service covers. If your job needs more, we price it upfront before we start.
Drain Inspection and Fitment
We inspect the drain body, replace corroded parts, and set the drain height to match the new pan. A clogged shower drain line gets cleared before the base goes down.
Pre-Sloped Pan and Liner
We set a pre-sloped base or build a mud bed, then install the shower pan liner or bonded membrane. Every pan gets a 24-hour flood test before tile.
Cement Backer and Waterproofing
Walls around the pan get cement backer board and a waterproofing membrane, sealed at the seams and corners so water can't get behind the tile.
Tile or Surround Finish
We set ceramic, porcelain, or stone tile with thinset and grout, or fit an acrylic surround. Seams and edges get silicone caulk for a water-tight finish.
How it works
How Our Installation Process Works
We remove the old pan, tile, and any failed cement backer board, then check the framing and subfloor for rot. If we find soft wood or a clogged shower drain line, we show you before we rebuild. Tear-out usually takes two to four hours.
We set the drain height, check the shower valve and drain alignment with a level, and replace any corroded fittings. A pipe wrench and drain wrench come out here. Getting the drain centered and at the right height now prevents a wobbly, leaking pan later.
We set the new shower base or build a mud bed with a pre-slope, then install the shower pan liner or a liquid waterproofing membrane over cement backer board. We flood-test the pan for 24 hours before moving on. No test, no tile.
Once the pan passes, we set ceramic tile, porcelain tile, or your chosen surround with a notched trowel and thinset mortar, then grout and caulk the seams with silicone caulk. A grout float and caulking gun finish the edges clean.
We run water through the drain, check for pooling, and confirm the shower door or glass lines up with the new base. You get a walkthrough of what we did, how to care for the grout, and our warranty terms before we pack up.
STEP 01Tear-Out and Inspection
We remove the old pan, tile, and any failed cement backer board, then check the framing and subfloor for rot. If we find soft wood or a clogged shower drain line, we show you before we rebuild. Tear-out usually takes two to four hours.
Tools & methods
Tools and Methods We Use
Tile saw and wet saw
Used to cut porcelain and natural stone tile cleanly around the drain and edges without chipping the finish.
Notched trowel and grout float
The notched trowel spreads thinset at the right depth; the grout float packs grout into the joints without pulling it out.
Drain wrench and pipe wrench
For setting the drain body and tightening supply or drain fittings behind the wall.
Level and measuring tape
We check the pan pitch and drain height with a level and tape so water runs to the drain, not the corners.
Caulking gun
Applies silicone caulk at the pan-to-wall joint and around the drain trim for a water-tight seal.
Real results
Before and after.
Walk-In Shower Pan Installation
Cracked Acrylic Base in Highland
A 1990s acrylic base had a hairline crack near the drain and flexed underfoot. The subfloor showed early water staining, and the caulk at the wall joint was failing.
After: We removed the base, dried and repaired the subfloor, and set a new pre-sloped pan with a flood test. The new base is solid, and the wall joint is sealed with silicone. Job took two days.
Book this service →
Walk-In Shower Pan Installation
Leaking Tile Pan in Old Town
A tile shower pan had been leaking into the ceiling below for months. The grout was cracked, the liner was compromised, and the drain connection was loose.
After: We tore out the tile and pan, replaced the liner and drain, re-tiled with porcelain, and flood-tested for 24 hours. The ceiling below stayed dry, and the shower was back in service in four days.
Book this service →
Walk-In Shower Pan Installation
Tub-to-Shower Conversion in Alameda
A homeowner wanted to replace a tub with a walk-in shower for easier access. The old tub drain was in the wrong spot for a centered pan.
After: We relocated the drain, framed the opening, set a low-threshold pan, and tiled the walls. The step-in is now 3 inches, and the shower is fully waterproofed and tested.
Book this service → Problems we solve
Shower Pan Problems We Fix in Pocatello
Most pan failures start small and show up late. Here are the ones we see most often and how we handle them.
Ask a pro →Cracked or flexing shower base
We pull the cracked base, inspect the subfloor, and set a new pan on a solid bed. If the framing is sound, most replacements are done in one to two days.
Water staining on the ceiling below
We trace the leak to the pan, drain, or valve, repair the source, and rebuild the pan with a tested liner. We don't tile over a leak.
Mold and mildew at the pan edges
We cut out the old sealant, dry the framing, and re-seal with silicone caulk after checking the pan liner. If the liner is compromised, we replace the pan.
Uneven shower base holding water
We reset or rebuild the pan with a correct pre-slope toward the drain, then flood-test to confirm water clears. A level and straightedge confirm the pitch before tile.
Transparent pricing
What Shower Pan Installation Costs
$1,200 - $3,800 depending on scope
Typical 2026 pricing for walk-in shower pan installation pocatello ID ranges from $1,200 to $3,800, depending on the pan type, drain condition, and finish. A simple acrylic base replacement sits near the low end. A custom mud-bed pan with a waterproofing membrane and new tile lands higher. We give you a firm price after tear-out, so you're not guessing. If you've been quoted shower pan replacement cost pocatello ID numbers that seem too low, check whether a flood test and new liner are included.
A correctly built pan protects the subfloor, framing, and ceiling below. The cost of repairing water damage usually runs higher than the pan itself, so getting it right the first time is the better spend.
•affects cost
A standard acrylic base costs less than a custom mud-bed pan with a bonded membrane. Larger or curbless pans take more labor and materials.
Get a quote ↗•affects cost
If the drain body is corroded or the line is clogged, we replace or clear it before setting the pan. That adds time and parts but prevents a callback.
Get a quote ↗•affects cost
Tile work adds labor and material cost compared to an acrylic surround. Natural stone tile costs more than ceramic or porcelain.
Get a quote ↗•affects cost
Water damage under an old pan often means replacing a section of subfloor. We show you the damage and price the repair before rebuilding.
Get a quote ↗ Proof you can check
Licensed, Insured, and Warrantied
- Licensed contractor · State of Idaho
- Insured and bonded · State of Idaho
- Manufacturer certifications · Schluter Systems and Laticrete
- ICC code compliance · International Code Council
Most walk-in shower pan installation pocatello ID jobs run $1,200 to $3,800 in 2026, depending on pan type, drain condition, and whether we're tiling or setting a surround. A simple acrylic base swap sits near the low end; a custom mud-bed pan with a waterproofing membrane and tile lands higher. We give you a firm number after tear-out, not a guess over the phone.
A shower pan is the waterproof, sloped floor of your walk-in shower that catches water and sends it to the drain. In Pocatello homes it's usually an acrylic base or a tile-covered mud bed with a liner underneath. If it's cracked, flexing, or holding water, the pan has failed and needs replacement before it damages the subfloor.
A standard shower base installation pocatello job takes one to two days on site, plus a 24-hour flood test before tile. Custom pans with a mud bed and membrane can run three to four days because of cure time. We schedule the tear-out and set as one block so your bathroom isn't torn up for weeks.
We do. ShowerPro Installation is a licensed contractor serving Pocatello and Bannock County, and pan work is a core part of what we do. Call +1 986-336-9120 and we'll set a time to look at your shower, measure the drain, and give you a written price before any work starts.
Ready when you are
Get Your Walk-In Shower Pan Installation pocatello ID Quote
A failed pan only gets more expensive the longer it sits. Call us at +1 986-336-9120 and we'll look at your shower, measure the drain, and give you a firm price. Licensed, insured, and warrantied work.
Get a Free Estimate +19863369120 →
Request an appointment
get your free shower estimate
Call us at +1 986-336-9120 or email [email protected] and we'll set up a free on-site measure. We answer the phone Monday through Friday, 8:00 to 18:00, and we return every message the same business day. For a leaking shower or a valve that's spraying, call any time - we run emergency call-outs 24/7.